MF Spectra DeckGrat (Stewe edit)
Description and Instructions
This is a MF Spectra optimized mapping combining the original Midi Fighter Deckalized and Instant Gratification mappings for deck A and B while deck C and D are re-mapped for control over a Remix deck.
What's in edit
-Full Remix Deck cell trigger for deck C and D.
-Middle side buttons switch page for active remix deck.
-Each cell display VU meter while sample is on play.
Setup Steps
1. In order to use this mapping, please download and unzip the mapping files. Inside you should see a .tsi file, a .mfs file, and a jpeg layout.
2. Open the MF Utility and Import the .mfs file. This will import the proper MF Spectra settings and button colors. You are welcome to change the button colors to what you want in the MF Utility. Please note that in some cases the mapping will override the set colors.
3. In Traktor's Preferences window, press the large Import button on the bottom left. Repeat this step once more to ensure that the FX settings load properly. Note: If the Beatmasher or Echo freeze buttons are not loading the proper effects you need to import the FX settings one more time.
4. Go into the Controller Manager and make sure that the In-Port and Out-Port for the mapping are set to your MF Spectra.
5. Start Jamming!
Credit goes to flashflooder for the original .tsi file.
What's in edit
-Full Remix Deck cell trigger for deck C and D.
-Middle side buttons switch page for active remix deck.
-Each cell display VU meter while sample is on play.
Setup Steps
1. In order to use this mapping, please download and unzip the mapping files. Inside you should see a .tsi file, a .mfs file, and a jpeg layout.
2. Open the MF Utility and Import the .mfs file. This will import the proper MF Spectra settings and button colors. You are welcome to change the button colors to what you want in the MF Utility. Please note that in some cases the mapping will override the set colors.
3. In Traktor's Preferences window, press the large Import button on the bottom left. Repeat this step once more to ensure that the FX settings load properly. Note: If the Beatmasher or Echo freeze buttons are not loading the proper effects you need to import the FX settings one more time.
4. Go into the Controller Manager and make sure that the In-Port and Out-Port for the mapping are set to your MF Spectra.
5. Start Jamming!
Credit goes to flashflooder for the original .tsi file.
Problem downloading or other issues? Let us know on the forum.
andrew ivan about 11 years ago
you should combine this with your isolate mapping and only use deck d for isolating and deck c for remix deck. i also miss the tempo bend functions from the original deckalized mapping. appreciate it!!!
Ari 11 months ago
It sucks. Does not work at all