When you import the mapping be sure to check the audio settings box. It should set it up automatically for you. Be sure to import the mapping twice. Hope this helps!

I have tried for more than a week now with different setups but failed miserably, the mappings work just fine as it should but the audio setup is a mess, if I use the windows built in card then it works but I would like the audio out from the quad, once i select the audio device in traktor as mixdeck quad there is a strange noise coming from the speakers connected to the quad and stays like that working fine if i dont load a track on any decks or dont play anything, once i play a deck the sound is awful and then the quad gets shut off from Traktor and stops working. I cannot close traktor without unplugging the quad is another problem I found. Any ideas?

Just updated the TSI. Make sure you import with all categories checked of including Audio settings. I also included screenshots of my working setup.

Thanks! I will definitely look into the cross fader troubles tomorrow. Make sure that you have your channel faders switch set to the correct position. Ch.1=Deck C (Left), Ch.2=Deck A (Left), Ch.3=Deck B (Right), Ch.4=Deck D (Right).

Hi Nelson, I just looked into the mapping. It seems to work correctly you may want to switch the CF Mode on the front of the unit. This will change the direction of the crossfader. Hope this helps!

Hi JHYPHINWILL! Thanks for your reply. I checked my CF mode switch and it was set as normal, probably I'm missing something here. Do you have your leds running under the platters in the Quad? Thanks a lot! You saved my Quad! :)

hello nelson are you fixed you leds under the platters ? i need you help gracias.

This mapping does not include LEDs under the platter.

ok thanks for you replay .i m new on dj world do you have any video for dummies ? how it is you numark quad working whit traktor 2.6 please can you post here .

unfortunately I do not have a video of this mapping.