Transport Kontrol C/D
Description and Instructions
Transport Kontrol Z2 (C/D)
If you own a Traktor Kontrol Z2 chances are you already have decks A and B covered with either an X1 / F1 or maybe Timecode CD or Vinyl but what about decks C and D? The mixer is billed as a 2 + 2 channel mixer but having only one volume knob to work with makes mixing 4 decks difficult. The Transport Kontrol mapping fixes this problem by adding additional volume, filter, basic transport and looping functionality to both the C and D channel strips. The volume and filter controls have been permanently remapped but the transport section can be toggled via 2 independent modifiers so you can jam out on the cue points for deck A while mixing in a 3rd track via transport controls on deck D or vice versa. Check out the instructions and description below…
INSTRUCTIONS
Once downloaded and unzipped you will find 1 .TSI file marked “Transport Kontrol” as there are no FX in the mapping it can be imported via the controller manager section of the preferences menu. Once uploaded make sure you set the in and out ports to Kontrol Z2 also make sure to delete or un-route the default Z2 mapping.
DESCRIPTION
The 2 knobs and 1 button contained in the “Macro FX” section on each side of the mixer have been permanently repurposed to control gain and filter for decks C/D
D/W Knob – Gain Adjust
FX Knob – Filter Adjust
ON Button – Filter On/Off
The 4 Hot Cue buttons on either side of the mixer as well as the deck select buttons, loop encoder and flux button can be toggled between default function and C/D transport controls by holding shift and pressing the corresponding deck select button: C for Channel Cand D for channel, to restore default function simply repeat the process (Shift + C/D).
With Transport Kontrol Engaged:
Hot Cue 1 – Load Selected Track
Shift + Hot Cue 1 – Load Next Track In List
Hot Cue 2 – Sync
Shift + Hot Cue 2 – Set As Master Tempo
Hot Cue 3 – Cue
Shift + Hot Cue 3 – Drop Cue
Hot Cue 4 – Play
Shift + Hot Cue 4 – CUP
Flux Button – Monitor Cue
Shift + Flux Button – Tap Tempo
Deck Select A/C (Left) B/D (Right) – Tempo Bend (Automatically Disengages Sync)
Loop Encoder – Loop Size & Set
While holding down the sync button (Hot Cue 2) the encoder will adjust tempo and pushing the encoder will reset tempo
LED Feedback:
Deck Select Buttons / Beat Tap – Beat Phase Meter
Hot Cue buttons 1-4 become post fader VU meter:
4 – Green
3 – Blue
2 – Light Orange
1 – Red
This mapping works perfectly with my latest X1 mk2 mapping: Legacy Kontrol X1 mk2 giving you access to 4 decks, loop macros and tons of FX…
djmatthewstar over 9 years ago
when in the deck modifier mode the flux button is headphone cue, if that's not working go into the audio output section of the preferences and make sure your output monitor is properly assigned... Let me know if this helps.