Freeze Mode MF3D 16 slices
Description and Instructions
IF YOU WANT TO USE THE MF3D FLIPPED, I.E., WITH THE BANK BUTTONS ON THE BOTTON, HERE YOU HAVE THE MAPPING https://maps.djtechtools.com/mappings/3601
The Deck Buttons have a double and intuitive function:
They select deck A, B, C or D, and at the same time turn on and off the selected deck.
All the 16 arcade buttons are slice triggers, from the top to the bottom and from the left to the right are 1 to 16 (i.e. On the top, from left to the right are triggers 1-4 and so).
On the Side Buttons I've put the values.
Left Side:
1st one (upper) Increases the size of the phrase
2nd (middle) Decreases the size of the phrase (if you have a way to set a loop and change the size of it, these two buttons do the same)
3rd (Lower) Save Settings (if you want you can go to the controller manager and delete it ;) )
Right Side:
1st one (upper) Increases the "Count Adjust", i.e., the number of slices (from 1 to 16)
2nd (middle) Decreases the "Count Adjust"
I've added the file you need for the Midi Fighter Utility
IF YOU FIND IT USEFUL LIKE THIS! :)
SI QUIERES USAR EL MF3D DE CABEZA, ES DECIR, CON LOS BOTONES DE DECK ABAJO, AQUÍ ESTÁ EL MAPPING https://maps.djtechtools.com/mappings/3601
Los Botones de los Decks tienen una doble e intuitiva función:
Seleccionan el Deck A, B, C o D y prenden y apagan el Freeze Mode en el deck correspondiente.
Los 16 Botones de Arcade disparan los hasta 16 "Slices", desde arriba hacia abajo y de izquierda a derecha (es decir, que hasta arriba, de izquierda a derecha están los slices 1-4 y así subsecuentemente).
En los botones laterales puse los valores.
Izquierda
1ro Aumenta el tamaño de la "phrase" (sample o como gusten llamarle, si tienen cómo activar loops y cambiar su tamaño, esto actúa de la misma manera)
2do Disminuye el tamaño de la "phrase"
3ro Guarda los settings de Traktor (pueden eliminarla si gustan)
Derecha
1ro Aumenta la cantidad de "slices" (pueden ser desde 1 hasta 16)
2do Disminuye la cantidad de "slices"
Añadí el archivo correspondiente para el "Midi Fighter Utility"
SI TE GUSTÓ Y LO ENCUENTRAS ÚTIL, REGÁLAME UN LIKE :)
Problem downloading or other issues? Let us know on the forum.
Comments for v0.1.0
Roy.Bear about 10 years ago
Awesome!
Just the mapping I needed! Thanks!
But I presume it should not supposed to happen, that you can only change the Size and Count on Deck A :(
Joziel Baez about 10 years ago
Oh Gosh! that was supposed to work ok. I actually did another mapping with the MF3D flipped, and just uploaded it. but if you want to check it out, in the Controller manager, the Slice Count and Size buttons should have Modifiers. For deck A Modifier should be M1=0, B M2=0, CM3=0 and D M4=0 Make sure they're correct, and if you prefer using the MF flipped here you have the new mapping, this one I triple checked as soon as I read you comment. Sorry for that and thank you for your comment :) https://maps.djtechtools.com/mappings/3601