• 4 Channel Mixer
  
• 4 Band EQ With Kills
  
• VU Meters Per Channel (Inc. Low, Healthy and High Signal Indicators)
  
• Master Clip Left & Right Indicators
• Channel Gain Control
  
• Channel Cue / Headphone Pre-listen
  
• Channel Filters
  
• Channel Volume
  
• Auto Control Of Cue / Mix
• Integrates Well With Split Cue

Traktor Set Up

EQ mode should be set to Xone to utilise the 4 band EQ. 

The use of the Xone filter type is recommended. 

When no channels are cued the mix is fed to headphones, when a channel cue is on the cue signal is fed to headphones. This is best used in a split cue configuration, but is still useful if split cue is not used. 

To utilise split cue functionality a hardware headphone volume control is needed (or other volume control after Traktor in the signal chain). If this is in place, Left Output Monitor should be output to the left headphone channel and Right Output Record should be output to the right headphone channel. Master Output Volume and Headphone Volume should then be set at the same level. 

Midi Fighter Set Up

This mapping uses bank 2 only.

All push switches should be set to CC Hold

All LEDs should be set to Black / Off

Indicator type is best set to Blended Bar

Row 1 should be set to CC mode (detent optional)

Row 2 should be set to Enc / 3FH/41H

Row 3 should be set to CC mode with detent on

Row 4 should be set to CC mode

Sensitivity should be set to personal preference