-Centre encoder touch + shift toggles tempo controls (Make sure to release encoder before the shift button to activate) Touch centre encoder again to exit tempo control mode
-When IN tempo control mode
-Sync = Tempo Sync
-Flux = CUP
-Hot Cues 1+2 = Pitch Bend (Sensitivity can be adjusted in preferences)
-Hot Cues 3+4 = Tempo Adjust (Default Sensitivity)
-Shift + Tempo Adjust (Hot Cues 3+4) = Fine Tempo Adjust

-tempo control mode can also be activated momentarily by simply touching the centre encoder with normal control being restored once the encoder is released.

ALL OTHER CONTROLS FUNCTION NORMALLY
_____________________________________________________________
To activate tempo controls simply touch the x1’s centre encoder and the hotcue buttons for both decks will turn orange, dark orange for hotcues 1 & 2 and light orange for hotcues 3 & 4. While touching the encoder, hotcues 1 & 2 now act as tempo bend buttons while 3 & 4 control tempo adjust, once you let go of the encoder they return to normal hotcue functionality. I took the concept one step further by adding a phase meter to the 4 LEDs on the FX buttons on either side of the unit: left side for the phase of the track playing in deck A and right side for the phase of the track playing in deck B, this not only provides a little visual help getting your mix in phase but also looks pretty cool.

Echo Freeze
This programmed delay effect is located on the 2 top FX/Mode buttons.
These buttons are unused when FX Units 1+2 are set to grouped panels.
The FX/Mode button on FX1 is for freezing the left deck, FX2 for the right.
Just press it to get an instant Echo-Out effect anytime.

FX Presets Unit 1 
Shift + FX 1  = Gater - Filter Lfo -Digital Lofi
Shift + FX 2  = BeatMasher - PeakFilter - IceVerb
Shift + FX 3  = Event Horizon - DarkMatter - Zzzurp

FX Preset Unit 2
Shift + FX 1 = Ramp Delay - BeatMasher - Reverb
Shift + FX 2 = LaserSlicer - WormHole - FlightTest
Shift + FX 3 = GranuPhase - FormantFilter - Bass-O-matic

Shift+ Play Button = Enable Key Lock