BeauBryte DJTT Kontrol S2 (Gonzalo Pozzo edit)

Description and Instructions

  • Cue as Numark way (Stopped track and cue = set cue / cue on play = back to start)

  • Disable effect restart values on jog fx mod.

  • Disable Scratch on jog push.

Hope you like it!

--------------------------------------------------------------------------------------------

High-res picture: http://www.beau-bryte.com/Kontrols2bbryte.png

This Kontrol S2 .tsi is clear, convenient and also very powerful.
It has good LED feedback and everything is setup properly.
It's a fully loaded mapping for anyone, with many useful tweaks added to N.I.'s standard map and DJTT Jog FX. Some of the extra features on top of the default mapping are:

Beat Tap - Jog FX - Echo Mods - Browser Mod - Headphone Mod - Master Clock Tempo - Preview Player - Key Adjust - 4 FX units - Monitor & EQ Sample Deck C+D - Quick load next track - FX presets - Instant FX - FX Off after loading - FX Panel Switches - Scroll To Cue - Any Shift On Mixer -Silent Pitch Fader Reset - Pitch Fader 0% Led - Cue Loop In/Out Move - Master Deck Leds - and more.

Basically you got all standard features plus DJTT Jog FX and many major improvements! If you want a complete but straightforward mapping suitable for performing, this is for you. It has automated features, like turn off fx after loading, automatically switch headphones and more. Also, this mapping comes with some FX presets, These are VERY easy to change in the controller manager by sorting comments. Read the manual for ALL features and more tips.

Highlights:
Deck set up: 2 track decks + 2 sample decks in Native HID Mode.
This one comes with 2 .Tsi mappings:
One with Gain=Gain and One with Gain=Filter..


Effects:
FX unit 1 + 2 = only for JogFX mode and Echo Mod.
FX unit 3 + 4 = Main FX decks with full control.

Jog FX Mode:
Use the Jog wheel for controlling effects.
Press Shift+Tempo Reset button to Activate JogFX.

Echo Mods:
Mod 1:
Shift+Left Loop Active Knob to activate an Echo Delay in FX Unit 2.
Mod 2:
Shift+Right Loop Set Knob to activate a Ramp Delay in FX Unit 2.

Beat Tap: Use the Shift buttons.
Beat Tap A = Hold Right Shift + Tap Left Shift
Beat Tap B = Hold Left shift + Tap Right Shift

Set Master Clock Tempo:
Deck A: Left Shift+ Left Sync = Set To Master Deck
  Right Shift + Left Sync = Set To Master Clock
Deck B: Right Shift + Right Sync = Set To Master Deck
  Left Shift + Right Sync = Set To Master Clock
(The Cue Transport buttons LEDS will be lit on the Master Deck)

Silently Reset Pitch Faders:
Left Deck: Hold Right Shift + Move Left Pitch Fader
Right Deck Hold Left Shift + Move Right Pitch Fader

Browser Mode:
Load A+B = Load Track in A/B
Shift + Load A+B = Quick Load next Track to Deck.

In Full Browser view searches can be typed instantly.
And: Press CUE A or B to preview a track in the preview player!
    Press Shift+Cue 1-4 to load sample from list into that slot.

Cue Monitor:
Cue A/B = Headphone monitor Deck A+B
Shift Cue A/B = Headphone monitor Deck C+D
Headphones will automatically jump to other deck when a next track is loaded!

Shift + Play = Key lock On
Shift + Tempo fader = Key Adjust
Shift + Sync = Set To Master
Cue = Rewind to start
Shift + Cue = Cue set

Shift +Sample Mode A = Snap On
Shift +Sample Mode B = Quantize On

FX Unit 1+2 = Automatically controlled by JogFX & Echo Mods

FX Unit 3:
Shift + Effect knobs = Browse all effects
Shift + Effect buttons = Load FX Presets
Shift + Dry/wet button = Switch Group/Single mode

FX Unit 4:
Shift + Effect knobs = Browse all effects
Shift + Effect buttons = Load FX Presets
Shift + Dry/wet button 1x = Set to Delay Single mode
Shift + Dry/wet button 2x = Switch FX panel to Group mode

Looping:
Left Knob: Beatjump / Loop Active
Right Knob: Set Loop Size / Set Loop
Shift + Press Left Knob = Echo Mod 1
Shift + Press Right Knob = Echo Mod 2
Shift + Turn Left Knob = Jump Next/Previous Cue/Loop
Shift + Turn Right Knob = Set Loop Size to 4
Buttons: Set Loop In/out, Flashing while using Echo Mod 1/2.
Shift+Loop In/Out+Jog Wheel = Move Loop in and Out points

Sample Decks:
Press Sample Button A or B to engage sample decks.
While sample decks are active, use the EQ's to control Deck C+D.
Click an empty slot to copy a loop from deck A or B into it.
Press Shift+Cue 1-4 to load a sample from browser list.
Press the Cue button again to unmute and retrigger play.
Shift+Cue 1-4 button will stop the sample
Press Shift+Cue 1-4 again in a stopped slot to clear the slot.
Press Shift from other deck + Cue 1-4 to Retrigger

Read the manual to see all FX settings, improvements and features!

HD Image: http://www.beau-bryte.com/Kontrols2bbryte.png

Please rate this mapping if you like it!
Kontrol_s2_mapping_beau_bryte
Problem downloading or other issues? Let us know on the forum.
-
Comments for v0.1.0
There are no comments for this version yet! Why don't you be the first.