VCI-400 - Standard controls with Performance pads
Description and Instructions
Vestax VCI-400 Mapping for TraktorPro 2.6 EDIT by DJ Rodrigo
Thanks to Vipre (who doesnt talk much for the mapping insparation and and Ean Golden for his VCI-400se mapping... beat-Slicer is as VCI-400se.
This is a summary of all older Versions and some new things remapped
Based on Vestax Original Mapping - works with all Firmware Version except EG-Edition
Import the Mapping with the BIG import Button !!
otherwise the effect´s won´t work as they should
After import you´ll see 7 Single Mappings:
1.VCI-400_Main
2.VCI400_Pad Mode-A
3.VCI400_Pad Mode-B
4.VCI400_Pad Mode-C
5.VCI400_Pad Mode-D
6.FX preset - controls (Keyboard)
Features:
-4x Pad Mode
-Loop Section re-mapped to become Beatslicer
-„Sweep Drama“ solo Effect mapped to loop recorder (just turn on channel fx before turning up volume and spice it by pressing the Delay feedback on)
-8 FX-Preset's per Deck
-Master output Level Meter added (for Firmware d006)
--Keyboard 1-6 has presets for FX 3 & 4 Keyboard shift is button to the left of "1"
--Use shift with the Filter knobs to make blance left to right, BUT return to middle once done.
--Set Deck master by pressing shift and the SYNC button of the deck needed to be master.
Description:
Pad Mode: The small Cue Buttons are assigned for Pad Modes 1-4
1.Pad Mode: MAIN
Top Button 1 & 2:Loop Move Enc.: Moves Loop 1 bar forward or back
(Loop in+out points and Loop Jump lenght are no longer adjustable)
Beatjump: Jump Btn. (1bar)
Push Move Enc.: Long Delay effect
Top Button 3: Loop active (on/off)
Top button 4: Turntable FX Stop/Start (press once then press again. this is to active the FX
since it only kicks in after 8bars. once read press again to use.)
Bottom Button 1: Loop 2, Loop 4, Loop 8, Loop 16
2. Pad Mode: HOT CUE´S
8 Hot Cues, delete with shift
Loop Encoders as Main Mode
3. Pad Mode: LOOP ROLL (now as beat Slicer with beat phase on led)
4. Pad Mode: FX-PRESETS (only for Deck A+B)
8 Pre-Selected Effects (Trigger)
1.Delay short
2.Delay T3
3.Filter92LFO
4.Flanger
5.Gater 1
6.Gater2
7.Beatmasher 1
8.Beatmasher 2
Loop Encoders as Main Mode
Loop Rec. Section:
Loop Recorder like Original but with shift, - except Dry/Wet
DEL: Quantize SIZE : Snap
REC : SHIFT + Play + DEL to delete loop
PLAY : Add Track to preparation List
Dry/Wet Fader +SHIFT: Sweep Drama Effect
Rubber Buttons:
Ass per instruction on picture
Sample Section in Front Mode SAMPLER works like Traktor S4
Thanks to Vipre (who doesnt talk much for the mapping insparation and and Ean Golden for his VCI-400se mapping... beat-Slicer is as VCI-400se.
This is a summary of all older Versions and some new things remapped
Based on Vestax Original Mapping - works with all Firmware Version except EG-Edition
Import the Mapping with the BIG import Button !!
otherwise the effect´s won´t work as they should
After import you´ll see 7 Single Mappings:
1.VCI-400_Main
2.VCI400_Pad Mode-A
3.VCI400_Pad Mode-B
4.VCI400_Pad Mode-C
5.VCI400_Pad Mode-D
6.FX preset - controls (Keyboard)
Features:
-4x Pad Mode
-Loop Section re-mapped to become Beatslicer
-„Sweep Drama“ solo Effect mapped to loop recorder (just turn on channel fx before turning up volume and spice it by pressing the Delay feedback on)
-8 FX-Preset's per Deck
-Master output Level Meter added (for Firmware d006)
--Keyboard 1-6 has presets for FX 3 & 4 Keyboard shift is button to the left of "1"
--Use shift with the Filter knobs to make blance left to right, BUT return to middle once done.
--Set Deck master by pressing shift and the SYNC button of the deck needed to be master.
Description:
Pad Mode: The small Cue Buttons are assigned for Pad Modes 1-4
1.Pad Mode: MAIN
Top Button 1 & 2:Loop Move Enc.: Moves Loop 1 bar forward or back
(Loop in+out points and Loop Jump lenght are no longer adjustable)
Beatjump: Jump Btn. (1bar)
Push Move Enc.: Long Delay effect
Top Button 3: Loop active (on/off)
Top button 4: Turntable FX Stop/Start (press once then press again. this is to active the FX
since it only kicks in after 8bars. once read press again to use.)
Bottom Button 1: Loop 2, Loop 4, Loop 8, Loop 16
2. Pad Mode: HOT CUE´S
8 Hot Cues, delete with shift
Loop Encoders as Main Mode
3. Pad Mode: LOOP ROLL (now as beat Slicer with beat phase on led)
4. Pad Mode: FX-PRESETS (only for Deck A+B)
8 Pre-Selected Effects (Trigger)
1.Delay short
2.Delay T3
3.Filter92LFO
4.Flanger
5.Gater 1
6.Gater2
7.Beatmasher 1
8.Beatmasher 2
Loop Encoders as Main Mode
Loop Rec. Section:
Loop Recorder like Original but with shift, - except Dry/Wet
DEL: Quantize SIZE : Snap
REC : SHIFT + Play + DEL to delete loop
PLAY : Add Track to preparation List
Dry/Wet Fader +SHIFT: Sweep Drama Effect
Rubber Buttons:
Ass per instruction on picture
Sample Section in Front Mode SAMPLER works like Traktor S4
Problem downloading or other issues? Let us know on the forum.
ali-dread over 9 years ago
Basically everything works apart from slicer. When I tap a pad in pad mode 3 effect 1 turn into turntable...
ali-dread over 9 years ago
The main thing I'm looking for is slicer...