Jester's X1 MkIII (2 Deck, FX & Mixer Modes, Preparation)

Description and Instructions

Hey folks, here is the latest version of my X1 Mapping, designed for those who wish to use the X1 as a mixer.

Notes:
- 2 Modes, FX (Standard) & EQ (Mixer)
- Crossfader can be used in any mode
- Preparation functions
- General tweaks
[FX ON]
- Toggles FX/EQ Modes
- Switching to EQ Mode engages filter, FX Mode disengages filter
- SHIFT + [FX ON] resets Gain & Filter
[DRY/WET]
- FX Mode: [DRY/WET] for FX Unit 1
- EQ Mode: Filter Adjust SHIFT + [DRY/WET] Gain Adjust
[1-3]
FX Mode - Effects activate 1-3 SHIFT + [1-3] cycles the available effects.
EQ Mode - EQ Kill Low, Mid, High (also mid low/high if you use the Xone eq)
SHIFT + [1-3] in EQ Mode activates Effects 1-3 just as if you were in FX Mode
Removed FX Unit 1&2 Kill when swapping modes, due to "customer feedback"
- Right [BROWSE] is normal playlist scrolling
- Left [BROWSE] switches to browser mode as well as normal scrolling
- Loading either deck switches back to deck view
- SHIFT + [LOAD] toggles between Deck/Browser views
- SHIFT + [BROWSE] scrubs through the track
- In EQ Mode, [FX1] & [FX2] are volume controls, with some led feedback (Full volume bright, low volume dim)
Crossfader:
- Works in any mode
- SHIFT + Left [FX1] & Right [FX2] activates the Crossfader
- SHIFT + Left [FX1] & Right [FX1] activates the Auto XF
SHIFT + Left [LOOP SIZE]
- Beatjump on focus deck (+/- 32)
SHIFT + Right [LOOP SIZE]
- Deck Zoom In/Out
SHIFT + Left [IN/OUT]
- Move Grid
SHIFT + Left [TEMPO BEND +/-]
- Adjust Analyzed BPM
SHIFT + [Sync]
- Drop Grid Marker
SHIFT + [CUE] + [CUP]
- Previous/ Next Cue point
- Also some miscellaneous features mentioned in coming video

***********

ADDED IN VERSION 3.1
 - Switching deck to FX mode now resets filter position
- Loading deck resets deck zoom to -.75 (default position)
- Loading deck resets crossfader to centre position
- Loading deck in Mixer Mode makes deck volume 0 (the idea being if you use the FX mode when you prep tracks, the deck volume stays up making things a bit easier)
- SHIFT + PLAY toggles BPM lock on/off
- In the zoomed preparation mode, tempo bend can be used to fine tune the playhead position before dropping a grid marker

***********
ADDED IN VERSION 4.0.1

- Changed LOOP SET To (HOLD)
- Removed Loop Active LED Feedback
- Added Post Fader VU Meters To Transport Section
- Removed BPM LOCK Command From "SHIFT+PLAY" + Replaced With A JUMP TO TRACK START Command
- Removed Clashing Filter Commands
- Changed GAIN ADJUST Command To L/R DRY/WET In EQ Mode
- Added Automatic Cue Panel Selector When Loading Track
- Removed BEATJUMP Command From "SHIFT+LEFT SIZE" + Replaced With A FAVORITES SELECTOR Command
- Changed ONLY BROWSER TOGGLE to "RIGHT BROWSE" Only
- Removed SELECT UP/DOWN BROWSER Command From "LEFT BROWSE" + Replaced With TREE SELECT UP/DOWN
- Added LIST EXPAND/COLLAPSE Command To "SHIFT+LEFT LOAD"
- Removed VOLUME RESET Command When Loading A Track In Internal Mode

***********

ADDED IN VERSION 4.0.2
- Added DECK VOLUME Reset Command to SHIFT+Left FX1/RIGHT FX1 (EQ Mode)
- Tweaked Post fader VU Meter Sensitivity
- Removed Pointless Beat Phase Monitor
Problem downloading or other issues? Let us know on the forum.
-
Comments for v4.0.2
Iconvinylrecord
MostFamous over 2 years ago
Hi Jester, I enjoy your mapping really ! But now i have a question. Im in 4FX Mode and if i Press FX1 or FX2 only FX1 and FX2 go on (enabled) what I want is if I press these buttons that FX3 & FX4 goes on instead. Or perfect solution with SHIFT+FX1 goes FX3 on and SHIFT+FX2 goes FX4 on and with only FX1 = FX1 and only FX2 = FX2 ...is this possible and how can i do that? Thank you for your help!
Avatar146123_2
Jester over 2 years ago

You can add fx3/fx4 to the same command in the controller mapping window easily enough, I would recommend making a copy of the mapping and modifying that one so you don't mess anything up :)

Iconvinylrecord
MostFamous over 2 years ago

Oh Jester thank you for the fast answer ! Maybe you can tell me the command :) ? I dont find the right one ;D

Iconvinylrecord
MostFamous over 2 years ago

Got it ! Anyway thank you for the Help :D !!

-
Comments for v4.0.2
Radioslave over 2 years ago
All downloads seem to be downloading as XML not TSI. Is this intended or am I missing something?
Avatar146123_2
Jester over 2 years ago

Try again mate. I re-upped as a .rar file

Radioslave over 2 years ago

Ace, just needed to update my Traktor. Seems the new versions can use XML in lieu of TSI