Made in Traktor Pro 2.8

...........................

........................................................Version 3.5 (27.02.2015)..................................

1. Added flux mode, use shift+vinil.

2. Added shift and bend -,+ to decrease and increase bpm on deck C and D

.............................Version 3.4 (22.02.2015)..................................

1. Added fader start. Use volume fader to start a track.

........................................................Version 3.3 (15.02.2015)..................................

1. Cue button lights up when track is loaded into deck and pause is pressed.

........................................................Version 3.2 (13.02.2015)..................................

1. Shift + Load unloads the track from deck.

2. Shift + Play set grid marker (use hotcue to delete)

........................................................Version 3.1 (11.02.2015)..................................

1.Use normal load buttons to load track into deck C and D, before was Shift+load A load to deck C and Shift+load B load to deck D.

........................................................Version 3.0 (09.02.2015)..................................

1. Cuise mode on - led output Shift.

2. Cue no.2 is load cue. (use shift to delete).

........................................................Version 2.7  (10.11.2014)..................................

1. Added Cup Play for each deck (press shift+cue)

2. Added Move Mode Selector for each deck ( press shift+loop)

........................................................Version 2.6  (10.11.2014)...................................

Gain knob has now 3 function.

1. Main function is volume efect adjust.

2. When headphone button is pressed activates a modifier that turns the gain knob into a headphone cue control (left side) and volume mix control (right side).

3. Use shift+gain to adjust gain for every deck.

 Fix beat phase led output on deck D.

........................................................Version 2.5  (08.11.2014)...................................

When deck A,B,C or D is in loop the play/pause button is flashing.

........................................................Version 2.4  (04.11.2014)...................................

NEW

Pressing Cue automatically jump to first cue.

Shift + Volume down activates 3 combo effects (Gater,Mulholand Drive and Peak filter). All 3 effects are controlled by volume fader creating a amazing scratch effect.

........................................................Version 2.3  (02.11.2014)...................................

The bend " + " is used to make a filter 92LFO effect, good for house track transitions (a combination effects for fx unit 3).

Beat phase for deck C&D.

Full sync out leds for deck C&D.

Everything works for all 4 decks.

........................................................Version 2.2  (29.10.2014)...............................

Shift + left select FX change deck size.

Shift + right select FX change layout.

Shift+treble=filter effect (only on deck C&D) on deck A and B activate filter by pressing Shift+high kill. The high knob has 2 states, a filter and high state. A visual led indicates the state.

The vinyl button is used to make a backspin effect ( the fx unit 3 must be activated)

The bend " - " is used to make a freeze effect (a combination effects for fx unit 3) , press shift and bend -,+ to decrease and increase bpm.

The gain knob is used for fx volume.( Use gain and shift to use gain)

Amount fx is used for all 3 effects slots.

Shif+amount fx = waveform display.

.............................................................Version 1.0.....................................

This is the most complete mapping for U-Mix Control 2 .(Everything works for all 4 decks)

At first start press Mode button to change the decks control to A and B (C and D are by default activated).The Mode button is deck changer.

The Select button activate the 3 hotcues (use shift to delete them) and the 3 effects button (group and single).

Effects works in single and group mode (change it in traktor preferences).

Use shift+loop to move,beatjump,loop beats.

Select FX change FX no.1.  

Cue monitor works for every deck.(Shift+left gain=Mix cue and Shift+right gain=headphones cue)

The sync button activate bpm sync (use shift + sync to activate full sync) 

Shift+mid=key change (press to activate key lock)

Shift+bass=Pan effect

Visual effect on beat phase sync at load A and B.

Press shift and jogwhell to search in track.