K1 Internal mixing 3 decks 1 fx
Description and Instructions
The K1 must be set to MIDI CHANNEL 16.
It's my first upload and i am very happy about feedback.
Forgotten feature: The search function:
Just hold the browse button and press SHIFT 1 (left shift button) once for activating search. Pressing the button again will erase your search and start a new one.
The first row of LED's on the very top of the controller (that only give output) is set to give beatphase out -> will light up in green as seen in the video on the "1" of the beat grid.
The LOADING function: It's the Buttons "E", "F" and "G" on the controller for decks A,B and C.
The LED's for loop active on are amber, not green (as in my picture).
I am a little bit proud of the move and loop move functions, it's fun to play around with. You can either use SHIFT ABC/1 or SHIFT ABC/2 to adjust the loop size for each deck and change the loop in point. With the beatjump/loop move size selector next to the loop size selector you can easily and precicely move around.
Also, i find it convenient to have the pause-hold funtion up there, makes it slightly turntable-ish if your don't want to beat sync. It will only pause when not in loop so you can still move loops by pushing and turning the upper encoder. If the function botheres you, just look for the play/pause Hold function and delete it.
Sometimes the Loop active on button has to be toggled on and off again for the for the loop move/ beatjump functions to work since it resets the move mode to beatjump ... it's an easy fix, i just was too lazy to bother since with toggling loop on/off occasionally, it's all good.
Sorry for the potentially confusing description and imagery, I'm not a native speaker and as I said it's my first upload.
It might seem chaotic, but it's acually very intuitive in my opinion. Please let me know what you think of it!
It's my first upload and i am very happy about feedback.
Forgotten feature: The search function:
Just hold the browse button and press SHIFT 1 (left shift button) once for activating search. Pressing the button again will erase your search and start a new one.
The first row of LED's on the very top of the controller (that only give output) is set to give beatphase out -> will light up in green as seen in the video on the "1" of the beat grid.
The LOADING function: It's the Buttons "E", "F" and "G" on the controller for decks A,B and C.
The LED's for loop active on are amber, not green (as in my picture).
I am a little bit proud of the move and loop move functions, it's fun to play around with. You can either use SHIFT ABC/1 or SHIFT ABC/2 to adjust the loop size for each deck and change the loop in point. With the beatjump/loop move size selector next to the loop size selector you can easily and precicely move around.
Also, i find it convenient to have the pause-hold funtion up there, makes it slightly turntable-ish if your don't want to beat sync. It will only pause when not in loop so you can still move loops by pushing and turning the upper encoder. If the function botheres you, just look for the play/pause Hold function and delete it.
Sometimes the Loop active on button has to be toggled on and off again for the for the loop move/ beatjump functions to work since it resets the move mode to beatjump ... it's an easy fix, i just was too lazy to bother since with toggling loop on/off occasionally, it's all good.
Sorry for the potentially confusing description and imagery, I'm not a native speaker and as I said it's my first upload.
It might seem chaotic, but it's acually very intuitive in my opinion. Please let me know what you think of it!
Problem downloading or other issues? Let us know on the forum.
Comments for v0.1.0
There are no comments for this version yet! Why don't you be the first.
