Launchpad MK2 Traktor Mix Control

Description and Instructions

This is my first attempt at making a mapping for the Launchpad MK2 to control Traktor. The main focus was on the Remix Control, the rest of it kind of grew around it. I finished 2 pages of each remix decks (32 Samples). 

The mapping is for 2 Track Decks (A/B) and 2 Remix Decks (C/D) at the bottom half. The red bar is to Mute/Load/Trigger each stripe.  Top 2 lines are cue controls for Deck A and B. Press a button to set a cue or jump to it. Hold Pan to delete a cue. 

The 3rd row is for loop control. The idea was to press the 3rd Button to start a 4 bar loop and Button 1 and 2 to increase, decrease the size. Button 4 turns off the loop. 

If you press the freeze button, the first 2 rows turn into the freeze selectors. 3rd row is to increase/decrease the number of slices. and Button #4 toggles the flux mode (loop continues playing at the place it should be).

Pressing the Volume Button takes you into Mixer Mode with X-Fader, volume controls, monitor toggles for each deck and the sync on and off buttons. In the first row, you can also set master deck (A or B) and speed up or slow down the deck.

If finally implemented FX1 into the controller mapping. On the left side you have the buttons for on/off and wet/dry, and the 3 additional buttons and dials. You can assign each deck to the FX with the next 4 buttons and switch through the FX Modes.
Problem downloading or other issues? Let us know on the forum.
-
Comments for v0.1.0
pippo over 6 years ago
this what i was looking for... thanks mate!!! good work