VCI 300 with working LEDs
Description and Instructions
The mapping corresponds pretty much with how the controller works in ITCH.
Biggest difference is, I made 6 cue buttons per channel instead of using the 3 buttons to set a manual loop.
The browsing section works a bit different as well, that speaks for itself with different software.
Making the mapping suitable for yourself is also easy, I used the least possible modifiers and each modifier only does one thing, so no difficult/advanced mapping to analyse.
All the LEDs, including the volumeLEDs work as they should.
EDIT: Crossfader is NOT mapped
Biggest difference is, I made 6 cue buttons per channel instead of using the 3 buttons to set a manual loop.
The browsing section works a bit different as well, that speaks for itself with different software.
Making the mapping suitable for yourself is also easy, I used the least possible modifiers and each modifier only does one thing, so no difficult/advanced mapping to analyse.
All the LEDs, including the volumeLEDs work as they should.
EDIT: Crossfader is NOT mapped
Problem downloading or other issues? Let us know on the forum.
Comments for v1.0.0
Midyagi over 12 years ago
Hey,
If you need mapping the Crossfader:
Settings->Controller Manager->Ad In..->Mixer->X-Fader->Position
After:
Learn-> Crossfader (Move the crossfader) -> Learn (Put again).
Greetings from Chile!
Alex S almost 13 years ago
cross fader and the volume faders for each side arent working
Alex S almost 13 years ago
I actually got it working. I used the crmnll edit posted and the messed with some internal/external mixer settings in traktor and the crossfader and volume faders worked.
KRISSPYcream almost 13 years ago
The cross faders and volume faders arent working for me can the uploader or @STANTON4958 help me out
portillokriss@gmail.com
ASAP thanks
Alex S almost 13 years ago
same problem please email me too at destroyraghav@gmail.com or make a forum post
stanton4958 almost 13 years ago
this is not working hope its just not me as i put the tsi in traktor and nothing works
stanton4958 almost 13 years ago
got it working very good mapping thanks
tomato almost 13 years ago
Cross fader isn't mapped, sorry, but it's the single most easy control to map, so it shouldn't be a problem. Volumefaders should be working? It's possible that you have to move them completely up and down once each time you start Traktor, so the software receives the midi-data.