Stop time knob is now a filter, start time knob is wet/dry rather than annoying slider which is know the browser layout open/close. Hitting mode enables keylock, and the keylock button changes tempo range between 14%, 35%, and 50%. The parameter knob has been mapping to the select loop size menu and pushing down on it sets and stops the loop. Pushing recall changes the parameter knob to controlling one of 3 effects knobs, and you can switch between the knobs simply by pushing down on the parameter knob. The search button and pitch benders (+ and -) work and  Scratch is left unmapped for your personal preference, but for those who feel the need to go above and beyond I recommend duplicating these deck mappings into decks C and D and using the scratch button as the modifier go between. Hence, remix decks.

Also, I did not include Midi Mappings for the mixer, mostly due to the fact that if you route the sound through the mixer externally you utilize the built in Numark DJ IO sound card with usually outperforms any internal computer sound cards. Just put channels 2 and 3 on midi/usb1 and midi/usb2, route the output channels AL: 1 AR: 2 and BL: 3 BR: 4, and make sure your deck is set to USB1/USB1 and not PROG/CUE. At this point your master volume should control the output of the master RCA out, your booth volume control the output of the booth RCA out, and record RCA out for routing into a computer for mixes.