Traktor Scratch Dicer Reversible Map
Description and Instructions
This mapping allows you to select which one of your Dicers (left or right) is connected via USB to the computer, adding flexibility to where you can place your computer with the standard USB and TRS cables. It's based on the official Novation map, with added functions to set Loop In/Out, Turn Snap On/Off, Browser Tree and List controls, and Track Loading.
The map comes with two .tsi files:
Normal Mapping (Dicer TSP.tsi): Dicer 1 (USB to Computer) controls Deck A and FX Unit 1, and Dicer 2 (linked) controls Deck B and FX Unit 2.
Inverted Mapping (Dicer TSP (inverted).tsi): Dicer 1 controls Deck B and FX Unit 2, and
Dicer 1 controls Deck A and FX Unit 1.
You can load both mappings to Traktor. To connect the Left Dicer via USB and link the Right Dicer, In Controller Manager, set the Dicer TSP mapping's MIDI In-Port and Out-Port to your Dicer, and disable Dicer TSP Inverted´s MIDI I/O (set In-Port and Out-Port to n/a). To connect the Rigth Dicer via USB, enable MIDI I/O for Dicer TSP Inverted and disable the I/O for Dicer TSP.
Important: Don't enable both mappings at the same time, it'll make each Dicer control both decks at the same time.
The mapping functions are:
|
Standard Layer |
Shift Layer |
|
|
Mode 1 |
Hot Cue Mode |
Shift Layer |
|
1 |
Set/Trigger Hot Cue 1 |
Clear Hot Cue 1 |
|
2 |
Set/Trigger Hot Cue 2 |
Clear Hot Cue 2 |
|
3 |
Set/Trigger Hot Cue 3 |
Clear Hot Cue 3 |
|
4 |
Set/Trigger Hot Cue 4 |
Clear Hot Cue 4 |
|
5 |
Set/Trigger Hot Cue 5 |
Clear Hot Cue 5 |
|
Mode 2 |
Looping |
Looping |
|
1 |
Move Loop Fwd |
Loop In/Set Cue |
|
2 |
Move Loop Back |
Loop Out |
|
3 |
Loop On/Off |
Loop On/Off |
|
4 |
Half Loop Length |
Instant Double |
|
5 |
Double Loop Length |
Snap (Global) |
|
Mode 3 |
FX |
Browser |
|
1 |
Dry / Wet Inc |
Browser List Up |
|
2 |
Dry /Wet Dec |
Browser List Down |
|
3 |
FX A On / Off |
Browser Tree Up / Collapse |
|
4 |
FX B On / Off |
Browser Tree Down / Expand |
|
5 |
FX C On / Off |
Load to Deck |
Problem downloading or other issues? Let us know on the forum.
Comments for v1.1.0
Comments for v1.0.0
Unit27 about 9 years ago
Glad you found it useful!