After going through a few mappings here, I thought I'd make a very basic mapping for those who want to use the K2 when they don't want to lug their gear around. It's kinda like the Z1. Sorry I don't have a photo or video, but it's very straight forward and easy to use. The push encoders serve multiple purposes(KEY\FXWET/DRY|FILTER/GAIN). The bottom left layer button toggles the 16 pads to hot cues 1-8 on the deck they are located on. The layer button on the bottom right is a shift button. Hold and push the shift and the hot cue you want to delete. Hold shift and turn the 2 top push encoders and you have jog control. Push those same encoders and that turns on sync. The bottom push encoders are cue mix and cue volume. Push the left and you expand browser and you can scroll. Push and hold the right and you have control over master out. the pads. the faders are as follows DECK A TEMP\DECK A VOLUME|DECK B VOLUME/DECK B TEMPO. Pots and buttons above the faders are as follows (sorted right to left and top to bottom). FX PARAMETER 1-3 + FX ON/OFF|HIGH-MID-LOW+EQ KILLS. If you push the KEY/WET/DRY encoder and the HIGH EQ  kill, it resets the key value. There's a few other tricks and features that I can't remember. If you need a hand, message me, I'll try and help. Make sure you set your K2 to Midi channel 1 and layers off. It's my first time mapping it so I didn't really know what I was doing.