TRAKTOR PRO 2.6 - REMIX DECK MAPPING FOR XONE K2
Description and Instructions
Mapped in traktor 2.6.6.
Use the following settings for your Xone:
- Midi channel: 9
- Latching layer mode: 2 (switch matrix)
This mapping assumes that you have another controller for the regular decks, mixing section and regular deck controls (I use it with another Xone K2 and a Xone:DX).
Some further notes:
- I was unable to map the reverse control per cell. I can only find a modifier in the controller manager, so any tips are welcome
- Bottom part (switch matrix, faders and first row of buttons) and the rotary encoders on top are dedicated per slot. Middle part (rotaries) are used for FX units, so for the entire deck. In a regular setup this means that the FX units are mapped double (as is the case for me), but I found it important to have FX control within short reach
- All assignmenst are for "device target", which is now set to Deck C. Feel free to change. Some controls however only have an option to assign to Remix deck 1, 2, 3 or 4 (in stead of target, A, B, C or D). I don't know how this will work out if you set it to device target D for example (might be that you need to change these to remix deck 4). Any advise tips are welcome.
- This is a first version, but I tested everything. Might be however that something is not working, if so let me know.
Enjoy
Problem downloading or other issues? Let us know on the forum.
Corey Steward about 10 years ago
Great mapping!! How would I map two K2 to control a remix deck each?
Ken Lee about 10 years ago
Excellent mapping, the K2 + your mapping makes the remix deck a pleasure to work with. Thank you, I look forward to more of your mappings. Cheers.
S7YX about 10 years ago
Thanks :) It's possible, but you have to run two K2's on two different midi channels. This means you have to remap the buttons as they are now all midi assigned to channel 9. Also you should change the deck focus of the midi map (now set to Deck C)...