Have been using this mapping with my external 2-channel mixer for a long time. Only improvement I would make is the looping section, cannot get it to light up only for the selected Loop Length.

Lit buttons will be marked (*) in the breakdown. A button lights up for Toggle ON state.

Except for Buttons and Faders specific to a deck, functions affect the selected target deck. To change target deck use M2 and M7 to change Deck Focus A/B.

Detailed breakdown Left to Right on the controller, refer to the picture diagram for support.

• Track <

• Load to Deck A

• Track >

• Load to Deck B

• Cycle

• Sync On/Off

• << / >>

• Scrub track backwards/forwards

• ◼ (Stop button)

• Cue – (*)

• ▶ (Play)

• Play – Focused Deck Flashes to Tempo (*)

• ● (Record)

• Record On/Off – (*)

• Marker Set

• Set Cuepoint

• Marker < / >

• Marker < / > behaves differently depending on if the Focused Deck is Playing or Stopped:

• Stopped - Marker <: Select Previous Cue

• Stopped - Marker >: Select Previous Cue

• Playing - Marker <: Trigger left hand side cuepoint, if pressed again triggers the same cuepoint

• Playing - Marker >: Trigger right hand side cuepoint until last set cuepoint is reached. If the last cuepoint is reached, re-trigger it.

• FX Unit 1:

• Knob 1: FX 1 Dry/Wet

• Knob 2: Slot 1 Dry/Wet

• Knob 3: Slot 2 Dry/Wet

• Knob 4: Slot 3 Dry/Wet

• S1: FX 1 On/Off – (*)

• S2: Slot 1 On/Off – (*)

• S3: Slot 2 On/Off – (*)

• S4: Slot 3 On/Off – (*)

• FX Unit 2:

• Knob 5: FX 2 Dry/Wet

• Knob 6: Slot 1 Dry/Wet

• Knob 7: Slot 2 Dry/Wet

• Knob 8: Slot 3 Dry/Wet

• S5: FX 2 On/Off – (*)

• S6: Slot 1 On/Off – (*)

• S7: Slot 2 On/Off – (*)

• S8: Slot 3 On/Off – (*)

• Deck A:

• M1: Set as Tempo Master – (*)

• M2: Select Deck as Focused Deck – (*)

• R1: Reset Tempo Fader

• R2: Mixer FX On/Off – (*)

• R3: FX Unit 1 On/Off – (*)

• R4: FX Unit 2 On/Off – (*)

• Fader 1: Pitch -/+

• Fader 2: Mixer FX -/+

• Deck B:

• M8: Set as Tempo Master – (*)

• M7: Select Deck as Focused Deck – (*)

• R8: Reset Tempo Fader

• R7: Mixer FX On/Off – (*)

• R5: FX Unit 1 On/Off – (*)

• R6: FX Unit 2 On/Off – (*)

• Fader 8: Pitch -/+

• Fader 7: Mixer FX -/+

• Looping

• M3: Loop Select + Set 4 Beats – (*)

• M4: Loop Select + Set 8 Beats – (*)

• M5: Loop Select + Set 16 Beats – (*)

• M6: Loop Select + Set 32 Beats – (*)

• Faders 3-6: Unused