BeauBryte DJTT Kontrol S2 (Matt Smith edit)

Description and Instructions

January 7, 2013 : V3.0 Update:

* Removed JogFX restoration, make your custom JogFX combos on the Fly!

* Mirrored Flux Mode and fine adjust 0.01BPM on both decks.
 
-------------------------------------------------------------------------------------------------------------------------------
Traktor Pro 2 mapping for N.I. Kontrol S2 by Beau Bryte


Quick Guide: http://www.beau-bryte.com/Quick Guide.png
Manual: http://www.beau-bryte.com/Manual.jpg

This Kontrol S2 .tsi is clear, convenient and also very powerful.
It has good LED feedback and everything is setup properly.
It's a fully loaded mapping for anyone, with many useful tweaks added to N.I.'s standard mapping and DJTT Jog FX. Some of the extra features on top of the default mapping are:

Beat Tap - Jog FX - Echo Mods - Browser Mod - Headphone Mod - Master Clock Tempo - Preview Player - Key Adjust - 4 FX units -  Deck C+D Mixer Controls - Quick load next track - FX presets - Instant FX - FX Off after loading - FX Panel Switches - Adjust Tempo 0.01 BPM - Any Shift On Mixer - Silent Pitch Fader Reset - Pitch Fader 0% Led - Move Loop In/Out Cues - Master Deck Leds - Beat Phase Leds - Loop Recorder or Remix Decks - Flux Mode - Macro FX - and more.

Basically you got all standard features plus DJTT Jog FX and many major improvements!
If you want a complete but straightforward mapping suitable for performing, this is for you.
It has automated features, like turn off fx after loading, automatically switch headphones and more. Also, this mapping comes with some FX presets, These are VERY easy to change in the controller manager by sorting comments. Read the manual for ALL features and more tips.


Highlights:
Deck set up: 2 track decks + 2 sample decks in Native HID Mode.
Mixer section for Deck C+D available while holding shift.
This one comes with 2 .Tsi mappings:
One with Gain=Gain and One with Gain=Filter..
........................................................................................................................................

Effects:
FX unit 1 + 2 = only for JogFX mode and Echo Mod.
FX unit 3 + 4 = Main FX decks with full control and many presets.

Jog FX Mode:
Use the Jog wheel for controlling effects.
Press Shift+Tempo Reset button to Activate JogFX.

Echo Mods:
Mod 1:
Shift+Left Loop Active Knob to activate an Echo Delay in FX Unit 2.
Mod 2:
Shift+Right Loop Set Knob to activate a Ramp Delay in FX Unit 2.

Mixer: EQ / PFL / Volume Faders:
Deck A+B by default,
Deck C+D m
ixer section available while holding Shift.

Beat Tap: Use the Shift buttons.
Beat Tap A = Hold Right Shift + Tap Left Shift
Beat Tap B = Hold Left shift + Tap Right Shift

Set Master Clock Tempo:
Deck A:  Left Shift+ Left Sync      = Set To Master Deck
              Right Shift + Left Sync   = Set To Master Clock
Deck B:  Right Shift + Right Sync = Set To Master Deck
              Left Shift + Right Sync   = Set To Master Clock

(The Cue Transport buttons LEDS will be lit on the Master Deck)

Silently Reset Pitch Faders without changing Tempo:
Left Deck: Hold Right Shift + Move Left Pitch Fader
Right Deck Hold Left Shift + Move Right Pitch Fader
Tempo Reset LED will blink when the pitch fader is at 0%

Fine Adjust Tempo by 0.01 BPM
For very accurate manual beat matching: Hold Shift+ Turn Left Loop Move Knob to increase or decrease the tempo with small steps. This knob works exactly the same as the pitch fader, so it's only usable when the deck is master, or sync is (half) off or awaiting.

Cue Monitor:
Cue A/B = Headphone monitor Deck A+B
Shift Cue A/B = Headphone monitor Deck C+D
Headphones will automatically jump to other deck when a next track is loaded!

Shift + Play = Key lock On
Shift + Tempo fader = Key Adjust
Shift + Sync = Set To Master
Cue = Rewind to start
Shift + Cue = Cue set
Shift +Sample Mode A = Snap On
Shift +Sample Mode B = Quantize On

Looping:
Left Knob: Beatjump / Loop Active
Right Knob: Set Loop Size / Set Loop
Shift + Press Left Knob = Echo Mod 1
Shift + Press Right Knob = Echo Mod 2

Shift + Turn Left Knob A = Fine Adjust Tempo fader by 0.01 bpm
Shift + Turn Right Knob A= Toggle Flux Mode A

Shift + Turn Left Knob B = Toggle Flux Mode B
Shift + Turn Right Knob B= Fine Adjust Tempo fader by 0.01 bpm

Buttons: Set Loop In/out points, Flashing while using Echo Mod 1/2.
Shift+Loop In/Out+Jog Wheel = Move Loop in and Out points

Browsing
Load A+B = Load Track in A/B
Shift + Load A+B = Load next track to deck.
Turn Browse Knob = Scroll list
Shift + Browse Knob = Scroll Favorites
Browse Button = Toggle Full Browser View
After switching to browser searches can be typed instantly.
Shift+Browse Knob = Scroll Collection
press CUE A or B to preview a track in the preview player
Press Shift+Cue 1-4 to load sample from list into that slot.

Flux Mode On/Off
-The easy way: Shift + Turn Right Knob A= Toggle Flux Mode A
                       Shift + Turn Left Knob B = Toggle Flux Mode B

-On the fly:

Deck A:  Hold Right Shift and press any HotCue on deck A
Deck B:  Hold Left Shift and press any HotCue on deck B
........................................................................................................................................

There's more! Read the manual to see all features!

Quick Guide: http://www.beau-bryte.com/Quick Guide.png
Manual: http://www.beau-bryte.com/Manual.jpg

Add me to your contacts on the DJTT forum.

Please rate this mapping if you like it!
Problem downloading or other issues? Let us know on the forum.
-
Comments for v0.1.0
There are no comments for this version yet! Why don't you be the first.