Mixtrack Pro Custom by Pico

Sign in to download
Upload an edit of this mapping

Description and Instructions

An intensive mapping for Mixtrack Pro + Traktor Pro. Supports 2 decks, 1 group + 1 single FX unit / deck, 6 Hot Cues / deck, Tempo fine-tune mode, channel filters and more...

Optimized for 8% Tempo Range, 25% Tempo Bend Sensitivity, FX1/2 Group, FX3/4 Single mode. Controls not listed below work as expected (maybe some visual awesomeness added :P).

LOOP MANUAL/AUTO button switches between 3 modes / deck...

- LED OFF
-- Encoder row: Group FX1/2 Effect 1 On/Off Button - Select - Dry/Wet - Amount
-- Loop row: Mode Select - Loop Size Dec - Loop On/Off (flashing with BPM) - Loop Size Inc

- LED RED
-- Encoder row: Single FX3/4 On/Off Button - Select - Dry/Wet (select pressed) - Param 1 (select pressed) - Param 2 - Param 3
-- Loop row: Mode Select - Single FX3 Param Reset - Button 1 - Button 2

- LED YELLOW
-- Encoder row: Group FX1/2 Effect 1 On/Off Button - Select - Dry/Wet - Amount
-- Loop row: Mode Select - Hot Cue 4 - Hot Cue 5 - Hot Cue 6

KEYLOCK button switches between 2 modes / deck...

- LED OFF
-- Tempo Fader works normally (direct)

- LED ON
-- Tempo Fader works in fine tune mode (relative to current BPM, +-0.5% @ 8% range), zero LED always ON

PITCH BEND -/+ -> Seek in track

SYNC -> Beat flashing LED + Trigger Tempo Sync
STUTTER -> Single FX 3/4 status LED + Momentary ON
SCRATCH -> Track End Warning LED + Jump to beginning of the track

EQ KILL LOW/MID/HIGH -> Hot Cues 1/2/3
VIEW -> Hold to delete Hot Cues on Deck A
TICK -> Hold to delete Hot Cues on Deck B

MASTER GAIN -> Cue Mix
BROWSE pressed + MASTER GAIN -> Cue Gain

BACK -> switch between file/folder browsing
BROWSE pressed in folder mode -> Expand/Collapse folder
BROWSE pressed in file mode + rotate -> Master Gain
BROWSE pressed in file mode + BACK -> Full screen Browser

CUE GAIN -> Deck A Filter
CUE MIX -> Deck B Filter
BROWSE pressed in file mode + CUE GAIN -> Deck A Gain
BROWSE pressed in file mode + CUE MIX -> Deck B Gain

JOG TOUCH (platter) -> Scratch
JOG MOVE (sides) -> Tempo Bend
Problem downloading or other issues? Let us know on the forum.
-
Comments for v1.1.0
Julian over 10 years ago
The master gain doesnt seem to work for me and therefore i cannot use my headphones. Is there any way to fix this??
Josh Leadbeater over 12 years ago
When the modifier button (manual/auto button) is turned to red, it does nothing for the effect encoders and loop buttons. I am not able to control anything when this button is red
PicoBp over 12 years ago

In RED it controls the FX3 and FX4 units, depending on which deck you are on. These have to be in single effect mode to do so. I've been using these FX banks mainly for echo freeze, backspin, beatmasher, which then could be configured in the RED modifier mode and temp triggered with the STUTTER button in any modifier state. - LED RED -- Encoder row: Single FX3/4 On/Off Button - Select - Dry/Wet (select pressed) - Param 1 (select pressed) - Param 2 - Param 3 -- Loop row: Mode Select - Single FX3 Param Reset - Button 1 - Button 2

Josh Leadbeater over 12 years ago

very nice! now that i understand, this mapping just went from great to even greater, nice work, but is there a way to adjust the first parameter of the single effect in effect band 3 and 4?

Josh Leadbeater over 12 years ago

can you help me map the stutter button so it performs as a stutter when the modifier button light is off or yellow?

MICHAEL VARELA over 12 years ago
MICHAEL VARELA DJ TICO ROBERT REMIX OLD SCHOOL MUSICA 2013 1980 1991 CELL 786-444-9968- HOUES 305-418-0490
m0ar over 12 years ago
I love it, but I've got the same problem as jason. Tempo bend does not work, and touching the platter only stops the track, even if i move it. No conflicting MIDI mappings!
jasonpalmer93 about 13 years ago
has issues between scratch and tempo bend, apart from that a very advanced custom for mixtrack pro
PicoBp about 13 years ago

Could you please describe the issues you were experiencing?

jasonpalmer93 about 13 years ago

it simply wouldnt scratch at all. and the tempo bend on the outer part of the turntable wasnt working either, everything else was though :)

PicoBp about 13 years ago

Strange, I have 500+ downloads on another site and noone experienced such problems. Don't you have another active mapping conflicting with mine? Scratching/bending has no relation to any modifiers in my configuration, so should do the same, no matter what. My guess is that you have more than one MIDI mappings set up in Traktor, and those are "arguing" over the controls, or maybe you have some version other than Traktor Pro 2.x.x. Let's figure this out, it would give me peace! :)

© 2023 DJTechTools