EGRV Control 2.1.1 (TouchOSC Template for Traktor Pro 2) (Lawrence edit)
Description and Instructions
Better description of this template can be found in the youtube video.
What’s New:
2.1.1
- Added new Flux buttons for both deck A and deck B
- Deck label A or B will blink to indicate it's state (playing or not playing)
- New LED lights as VU meter
- Longer volume faders
2.1
- New pitch reset button
- moving the filter activation and seek fader above the EQ fader to prevent
accidental touch to Play and Sync buttons
- Added functionality to pitch bend buttons. It becomes loop movers when you
press shift.
- Pressing gate while moving EQ Low fader on deck A will enable you to change
the value of the gater. Pressing gate while moving EQ Mid fader on deck B will
enable you to change the value of the gater.
- Pressing shift and gate/delay while moving EQ Low fader on deck A will enable
you to change the value of the delay. Pressing shift and gate/delay while moving
EQ Mid fader on deck B will enable you to change the value of the delay
- LFO/Flange functions the same as Gate/Delay.
LFO + EQ Mid deck A change value of LFO
SHIFT+LFO+EQ Mid deck A Change value of Flange
LFO + EQ Hi deck B change value of LFO
SHIFT+LFO+EQ Hi deck B Change value of Flange
- When you press FLT it will activate/deactivate filter and reset the filter value to 0
- Pressing Mash 1 and moving EQ fader Hi on Deck A will change value of
beatmasher
- Pressing Mash 1 and moving EQ fader Low on Deck B will change value of
beatmasher
Requirement:
TouchOSC 1.8
TouchOSC Editor 1.5.4 (for loading the template)
OSX 10.6 and above
Traktor Pro 2
Christian over 11 years ago
LOGOOU over 11 years ago
Lawrence over 11 years ago
it should work on PC (i cant cobfirm it since I dont own any PC). as for your traktor version, in general it should work but there might be several function that will not work (once again, I cant confirm it since i tested it only on the latest version of Traktor). jusg download them here.
Lawrence over 11 years ago
Hhhm... Honestly I don't know. It works perfect on my setup. The only glitch known in there is when you started, the low for A and mid for B is always all the way down on touch osc despite its actual position in Traktor being in the middle (0). I couldn't figure out how to fix that particular problem. Have you tried re-exporting the. Tsi file several times? I've had similar issues when I upgraded from 2.5 to 2.6. A quick remapping on that particular solves the problem. The FX page, I have to check. I haven't touched it since the first version to be honest.